Loading ...
Setup SVN With Attached Drives on CentOS

Setup SVN With Attached Drives on CentOS

These are the step that I took to create a SVN server using CentOS 7, while attaching drives as repositories instead of creating a monstrous system drive and importing everything there.

If you follow to a “T”, you too can have the play-ground I have =)

I will lay out my exact steps, including creating the virtual machine I used for this.  If you are currently using a VM or dedicated machine then you can skip those steps.  I imagine this would work on CentOS 5 and up, but don’t quote me on that.

1.       Create VirtualBox Virtual Machine

a.       Have a CentOS ISO ready

                                                               i.      I chose v7 as the latest

b.      Setup with 20G hard disk, Bridged Networking, 4G Ram, 2 Processors, 3 – 1GB test disks, no sound, minimal video memory

c.       Install CentOS as Basic Web Server, no GUI

                                                               i.      Include PHP, Perl, Python, NFS during initial install

                                                             ii.      No need for CPanel

d.      Reboot

e.      Run yum update

f.        Run systemctl start httpd.service

g.       Run systemctl enable httpd.service

h.      Run the following 3 to allow ports 80 and 443 through the firewall

                                                               i.      firewall-cmd –permanent –zone=public –add-service=http

                                                             ii.      firewall-cmd –permanent –zone=public –add-service=https

                                                            iii.      firewall-cmd –reload

i.         Now change SELinux to disabled in /etc/selinux/config, change SELINUX=enforcing to SELINUX=disabled

j.        Run yum install subversion mod_dav_svn

k.       Run the following

                                                               i.      mkdir /svn

                                                             ii.      mkdir /var/www/svn

                                                            iii.      chown –R apache:apache /svn

                                                           iv.      chown –R apache:apache /var/www/svn

l.         Now we need to configure SVN

                                                               i.      Run nano /etc/httpd/conf.modules.d/10-subversion.conf

                                                             ii.      Add In:
Alias /svn /var/www/svn
<Location /svn>
   DAV svn
   SVNParentPath /svn/
   AuthType Basic
   AuthName “Emagine Repositories”
   AuthUserFile /etc/svn-auth-users
   Require valid-user

m.    The save the file by hitting CTRL-O, then CTRL-X to exit nano

2.       Now we need to setup user access

a.       Only the first user created needs the –c flag, all the rest need only the –m flag

b.      Run htpasswd –cm /etc/svn-auth-users kpirnie

                                                               i.      For some reason, I had to run this command twice

                                                             ii.      Type in the new password twice

3.       And now the fun begins… I made 3 1GB dummy disks before, when setting up the VM, now we need to partition, format, mount them

a.       Run the following commands on each disk (NOTE: You can skip this step if simply attaching storage, run fdisk –l to see what’s attached for disks)

                                                               i.      fdisk /dev/sdb

                                                             ii.      n

                                                            iii.      default the next 4 to create a primary partition using all space

                                                           iv.      w

                                                             v.      mkfs.ext4 /dev/sdb1 (sdc1, sdd1 as well)

b.      Mount the disks

                                                               i.      mkdir /mnt/Disk1 (also for Disk2 and Disk3)

                                                             ii.      nano /etc/fstab

                                                            iii.      add in a line for each disk, and make sure there is an empty line at the end of the file

                                                           iv.      /dev/sdb1           /mnt/Disk1         ext4       defaults               0              0

                                                             v.      Repeat as necessary for each disk attached

                                                           vi.      Remount everything with mount –a

c.       You can use step b above to mount any disk you have attached to the server

d.      Now we add the proper permissions

                                                               i.      Run the following for each disk added (replace Disk* for your mount point)

1.       chown -R apache:apache /mnt/Disk1

2.       chcon -h system_u:object_r:httpd_sys_content_t /mnt/Disk1

3.       chcon -h apache:object_r:httpd_sys_content_t /mnt/Disk1

e.      Now create & import the repos (replace Disk* with each disk you mounted, or whatever you want to name it)

                                                               i.      mkdir –p /mnt/Disk1/{trunk,branches,tags}

1.       Copy all content from the disk to the ‘trunk’ directory we just created

                                                             ii.      svnadmin create /svn/Disk1

                                                            iii.      svn import –m “Initial Import” /mnt/Disk1 file:///svn/Disk1